9. Repeat steps 7 and 8 for any additional modules that you want to install.
10. Return the Easy Access drive bay to the down position. Be sure not to pinch the
cables in the chassis when lowering the Easy Access drive bay.
11. Replace the front bezel and computer access panel.
12. If you normally lock the Smart Cover Lock, use Computer Setup to relock the
lock and enable the Smart Cover Sensor.
The computer automatically recognizes the additional memory the next time you
power on the computer.
Removing the Expansion Card Cage
To remove the expansion card cage:
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the
lock.
2. Turn off the computer properly through the operating system, then turn off any
external devices.
3. Disconnect the power cord from the power outlet and disconnect any external
devices.
4. Remove the computer access panel.
Hardware Reference Guide
Hardware Upgrades
2-13