Hardware Upgrades
7. Replace with the appropriate bezel by pushing the bezel into place.
The type of bezel you need will depend on the type of device you are installing. If
you are installing a diskette drive, you must install a diskette drive bezel (PN 316002-
001). If you are installing a hard drive, you must install a bezel blank (PN 316006-
001) as shown in the illustration below. If you are installing a 3.5-inch device other
than a diskette drive or hard drive, you must install the 3.5-inch device bezel (PN
316008-001). Contact an authorized HP reseller or service provider to order the
appropriate bezel when reconfiguring the computer.
8. Connect the power and data cables.
9. Replace the front bezel and computer access panel.
Hardware Reference Guide
2-35
Need help?
Do you have a question about the d530 Small Form Factor and is the answer not in the manual?
Questions and answers