Using The Tuner; Listening To The Radio; Tuning Into Radio Stations - Onkyo HT-S780 Instruction Manual

Using the Tuner

Listening to the Radio

STANDBY/ON
STANDBY
A SPEAKERS B TONE +
PHONES
PURE AUDIO MULTl CH DVD
With the built-in tuner, you can enjoy AM and FM radio
stations. You can store your favorite stations as presets
for quick selection.
1 Use the [TUNER] input selector
TUNER
button to select either AM or FM.
In this example, FM has been selected.
Band
(Actual display depends on country.)
AM Frequency Step Setup
(not North American model)
Here you can specify the AM frequency step used in
your area. When this setting is changed, all radio presets
are deleted.
1 Press the [SETUP] button and
use the Up and Down [
buttons to select "0. Hardware
Setup," and then press [ENTER].
2
Use the Up and Down [
buttons to select "AM Freq," and
then use the Left and Right
[
10 kHz: Select if 10 kHz steps are
9 kHz: Select if 9 kHz steps are used
3
Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the remote
controller by using its [SETUP] button, arrow buttons,
and [ENTER] button.
36
TUNING MODE
TUNING
TUNING / PRESET
ENTER
RETURN SETUP
STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
VIDEO
VIDEO 1 VIDEO 2 VIDEO 3 TAPE TUNER CD
VCR
TUNER
Frequency
]/[ ] buttons to select:
used in your area.
in your area.

Tuning into Radio Stations

■ Auto Tuning Mode
1
TUNING MODE
MASTER VOLUME
VIDEO 3 INPUT
L AUDIO R
2
TUNING / PRESET
ENTER
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator appears on the display, as shown.
■ Manual Tuning Mode
1
TUNING MODE
2
TUNING / PRESET
]/[ ]
ENTER
]/[ ]
The American model changes FM frequency in 0.2 MHz
steps, 10 kHz steps for AM. For other models it's
0.05 MHz steps for FM and 9 kHz steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Tuning into weak FM stereo stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
Press the TUNING Up or Down
[ ]/[ ] button.
Searching stops when a station is
found.
TUNED
FM STEREO
Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
Press and hold the TUNING Up or
Down [ ]/[ ] button.
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
AUTO