Basic Playback; Loading & Removing Discs; Loading Discs During Playback - Onkyo HT-S780 Instruction Manual

Basic Playback

DISC
DISC SKIP
SELECT
DV-CP702
PLAY/ENTER
Loading & Removing Discs
DVD VCD CD MP3 WMA
This section explains how to load and remove discs.
1
Press the OPEN/CLOSE [ ]
button.
The disc tray opens and the six disc num-
ber indicators appear on the display. A cir-
Remote controller
cle appears around the number of the disc
OPEN/
bay on the right.
CLOSE
2
Place a disc, label side up, into
each bay.
3
Press the [DISC SKIP] button to
access the other disc bays.
The disc tray turns counterclockwise two
bays at a time.
Remote controller
DISC SKIP
4 When you've finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
See page 22 for information on selecting
and playing discs.
Tip: If you press the Play [ ] button, the
Remote controller
disc tray will close and playback of the
OPEN/
disc in the right bay will start automati-
CLOSE
cally. If there is no disc in that bay, the
DV-CP702 will check the other bays and
play the first disc it finds.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close and playback of the selected disc
will start automatically.
OPEN/
CLOSE
ON STANDBY
OPEN/
CLOSE
SEARCH LAST M MEMORY CHAIN MODE
REPEAT
1 2 3
A-B
4 5 6
RANDOM
7 8 9
DISPLAY
+10
0 CLEAR
TOP MENU MENU
ENTER
RETURN SETUP
AUDIO ANGLE SUBTITLE
DISC 1 DISC 2 DISC 3 STEP/SLOW
DISC1–6
DISC 4 DISC 5 DISC 6
DISC SKIP PROGRESSIVE DIMMER
DISC SKIP
RC-542DV
JPEG
Notes:
• You can load up to six discs. You don't have to load all six
discs every time.
• When the disc tray is closed, all of the disc indicators
appear until the DV-CP702 has checked each bay for the
presence of a disc. If a bay is found to have no disc, the
corresponding indicator disappears.
• The disc tray can be opened and closed even while the DV-
CP702 is in Standby mode, so you don't have to turn it on
to load or remove your discs. (The disc tray may take sev-
eral seconds to open.)
• The DV-CP702 supports 8 cm and 12 cm discs. To avoid
damaging your discs or DV-CP702, always place discs in
the center of the disc bays.
• Only load discs that are supported by the DV-CP702 (see
page 7). Don't load cartridge-type discs.
• To avoid personal injury, keep your hands away from the
disc tray as it closes.
• Always use the OPEN/CLOSE [ ] button to open and
close the disc tray. Never push the disc tray, and don't
touch it, or obstruct it while it's opening or closing. Don't
press down on the disc tray while it's open, and don't load
anything other than supported discs. Doing so may damage
your discs or DV-CP702.

Loading Discs During Playback

DVD VCD CD MP3 WMA
This section explains how to load and remove discs without
stopping playback.
1
Press the OPEN/CLOSE [ ] button.
The disc tray opens.
The disc that's currently playing remains
inside the DV-CP702 and its disc bay is
Remote controller
empty and won't come to the front. To
OPEN/
remove this disc you must stop playback
CLOSE
before pressing the OPEN/CLOSE [ ]
button.
2
Load or remove discs as required,
and press the [DISC SKIP] button
to access the other disc bays.
The disc numbers appear onscreen. The
Remote controller
DISC SKIP number of the disc bay on the right is
highlighted.
3 When you've finished, press the
OPEN/CLOSE [ ] button again.
The disc tray closes.
Playback of the current disc continues
uninterrupted until you either stop play-
back or select another disc.
Remote controller
Tip: If you press one of the DISC
OPEN/
SELECT 1–6 buttons, the disc tray will
CLOSE
close, playback of the current disc will
stop, and playback of the newly selected
disc will start automatically.
JPEG
21