Starting, Pausing & Stopping Playback; Selecting Discs - Onkyo HT-S780 Instruction Manual

Basic Playback
DISC SKIP DISC SELECT
PAUSE
STOP
PLAY/ENTER

Selecting Discs

DVD VCD CD MP3
The section explains how to select loaded discs.
Use the DISC SELECT buttons to
select loaded discs.
On the remote controller these buttons are
labelled [DISC 1], [DISC 2], and so on.
On the display, the number of the current
Remote controller
disc has a circle around it.
DISC 1 DISC 2 DISC 3
What happens next depends on the type of
DISC 4 DISC 5 DISC 6
disc you selected, as follows:
DVD-Video: Typically a menu appears
onscreen. See page 24.
Video CD: Playback starts automatically.
Audio CD: Playback starts automatically.
MP3/WMA/JPEG: The Disc Navigator
appears onscreen. See page 26.
JPEG-only CD: With some JPEG CDs,
picture thumbnails appear onscreen. See
page 30.
Notes:
• The type of disc currently selected is shown on the display:
DVD, VCD, or CD (see page 11).
• You can select discs while the DV-CP702 is stopped or dur-
ing playback.
• You can use the [DISC SKIP] button to skip the current
disc and start the next disc. If disc #6 is the current disc,
disc #1 will be selected next.
22
TOP MENU
ENTER
RETURN
AUDIO ANGLE SUBTITLE
DISC 1 DISC 2
DISC1–6
DISC 4 DISC 5
DISC SKIP PROGRESSIVE
DV-CP702 DISC SKIP
RC-542DV
WMA JPEG
Starting, Pausing & Stopping Playback
MENU
DVD VCD
SETUP
This section explains how to start, pause, and stop playback.
■ Start
DISC 3 STEP/SLOW
DISC 6
DIMMER
Remote controller
■ Pause
Remote controller
■ Stop
Remote controller
Notes:
• During playback, you can select chapters or tracks by
using the Next [
• When you stop playback of a DVD-Video disc or Video
CD, the DV-CP702 remembers the point at which playback
was stopped and "Resume" appears onscreen for a few sec-
onds. To resume playback from that point, press the Play
[ ] button. To cancel the Resume function, press the Stop
[ ] button again. The Resume function is reset when
another disc is selected.
• With the Last Memory function you can resume playback
from a specific point even if the disc has been removed (see
page 36).
• Do not move the DV-CP702 or subject it to vibration dur-
ing playback. Doing so may damage your discs or DV-
CP702.
• You can improve the picture quality of paused playback
with the Pause/Still setting (see page 43).
CD MP3 WMA
To start playback, press the Play
[ ] button.
Playback starts and the Play
appears on the display.
If the disc is a DVD-Video or Video CD
with PBC (Playback Control), you may
need to start playback from a menu (see
page 24).
The front panel Play [ ] button performs
play and enter functions. The remote con-
troller has separate Play [ ] and
[ENTER] buttons.
To pause playback, press the
Pause [ ] button.
Playback pauses and the Pause
tor appears on the display.
To resume playback, press the Play [ ]
button.
Playback resumes and the Pause
tor disappears.
To stop playback, press the Stop
[ ] button.
Playback stops and the Play
disappears.
] and Previous [
indicator
indica-
indica-
indicator
] buttons.