Operation Setting Menu - Onkyo HT-S780 Instruction Manual

Configuring the DV-CP702
Screen Saver
DVD VCD CD MP3 WMA
With the Screen Saver function you can protect your TV
against screen burn-in, which can occur when the same
image or menu is displayed for a long time.
Off: Screen saver off.
Screen saver on.
On (default):
When the Screen Saver function is set to On, and DVD-Video
or Video CD playback is paused or stopped for 15 minutes,
the Screen Saver function automatically displays a moving
image.
Once the screen saver has been activated, you can cancel it
by pressing either the Play [ ] button or Pause [ ] button.
Notes:
• The Screen Saver function also works with audio CDs and
MP3/WMA discs. If you leave playback paused for five
minutes, the screen saver will activate.

Operation Setting Menu

Pause/Still
DVD
The Pause/Still setting determines how still pictures are dis-
played when DVD-Video playback is paused or when using
frame-by-frame playback.
A frame or field is displayed depending
Auto (default):
on the disc.
A frame is displayed.
Frame:
TV pictures are made up of fields, and there are two fields per
picture (frame). In general, the Frame option will provide the
best picture quality, although in some cases the picture may
appear slightly blurred. Since a field has only half as much
information, the picture quality will be lower, but it won't be
blurred.
Parental Lock
DVD
With the Parental Lock function you can block access to cer-
tain scenes that the authors have flagged as being unsuitable
for children.
1 Select Parental Lock–>On, and
then press the [ENTER] button.
Remote controller
The Security Code box appears onscreen.
ENTER
2
Use the number buttons to enter a
4-digit security code, and then
Remote controller
press [ENTER].
The Level box appears onscreen.
ENTER
JPEG
3 Use the Up/Down [ ]/[ ] buttons to
specify the parental lock level from
Remote controller
1 through 8, and then press
[ENTER].
ENTER
The parental lock is now set.
The parental lock levels conform to U.S.
movie ratings as follows:
• Level 7: NC-17
• Level 6: R
• Level 4: PG13
• Level 3: PG
• Level 1: G
4
When you've finished, press the
[SETUP] button.
Remote controller
The settings are stored.
SETUP
Notes:
• When entering a security code, you can use the [CLEAR]
button to delete the numbers entered so far, if necessary.
• This setting can be changed only when playback is
stopped.
• Once this setting has been turned on and a security code
set, if you want to turn off parental lock, or change the
parental lock level, you'll be prompted to enter the security
code.
• Not all discs use parental lock. See the disc's sleeve notes
for details.
• Discs with parental lock may cut certain scenes, replace
certain scenes with children-friendly scenes, or prevent
playback of the entire disc.
• If you forget the security code, instead of entering the num-
bers, press the STOP [ ] button four times.
• When using a disc that uses parental control to restrict
playback, occasionally, depending on the DV-CP702's
operating status, you may not be able to remove the disc by
using the [OPEN/CLOSE] button. If this does occur, close
the disc tray, use the [DISC SKIP] button to select another
disc bay, open the tray again, and then remove the disc.
PBC
VCD
With the PBC setting you can enable or disable PBC (Play-
back Control) functions on Video CDs.
PBC functions disabled.
Off:
On (default): PBC functions enabled.
Notes:
• PBC functionality varies from disc-to-disc. See the disc's
sleeve notes for details.
• Not all PBC Video CDs use all of the PBC functions sup-
ported by the DV-CP702
43