Table of Contents
Advertisement
5
C H A P T E R
Installing an OS Onto a Bootable
Array on an x64 System
If you chose to create a bootable array on an x64 system as part of your installation
(see
"Creating a Bootable Array on an x64 System" on page
operating system and the HBA driver on that bootable array.
This chapter explains how to install an operating system (OS) onto a bootable array
and then install the HBA driver on the array.
Note – If you are using a SPARC system and you chose to create a bootable array as
part of your installation
page
Solaris OS on a SPARC System" on page
Note – If you want to perform a standard installation on an existing operating
system, DO NOT perform the procedures in this chapter. Instead, go to
the Driver on an Existing Operating System" on page
Note – Each computer system is different. The instructions in this chapter might
need to be modified, depending on your actual system configuration. See your
system documentation for more information.
This chapter contains the following sections:
"Preparing to Install an OS" on page 40
■
"Installing the HBA Driver With an OS" on page 40
■
("Creating a Bootable Array on a SPARC System" on
33), DO NOT perform any steps in this chapter. Instead, skip to
27), you can install an
45.
49.
"Installing the
"Installing
39
Advertisement
Table of Contents
