Welcome; Unpacking - Crown IQ-PIP-USP3 Reference Manual

IQ-PIP-USP3/CN

1 Welcome

®
The Crown IQ-PIP-USP3/CN is a 3rd generation DSP-based PIP™ (Programmable Input
Processor) input module for PIP2™ compatible amplifiers.* It connects the amplifier to a
100 Mb Ethernet network allowing it to be remotely controlled and monitored via IQ . In
addition, the USP3/CN allows the transport of real-time digital audio via CobraNet™ over
the same Ethernet network.
Figure 1.1 IQ-PIP-USP3/CN Module
The USP3/CN is a TCP/IQ series component and connects to the audio control/monitor
network using standard 100Mb Ethernet hardware (switches, Network Interface Cards, and
cables). CobraNet audio is available over the same 100Mb Ethernet network, providing a
simple to install, single plug solution for audio distribution, control, and monitoring.
The USP3/CN's SHARC DSP processor gives the user an enormous amount of digital sig-
nal processing. Audio routing, faders, meters, polarity & mute, input compressors, filters,
delays, multimode output limiters, error reporting, and load monitoring are all available. A
built in noise generator and sine generator provide noise masking and test capabilities. The
enhanced AUX port capability allows the user to interface with the amplifier to provide
external manual control and monitoring.

1.1 Unpacking

The unit is shipped in a protective antistatic bag. CAUTION: STATIC ELECTRICITY
MAY DAMAGE THE UNIT. Use caution when handling the unit. Carefully ground your-
self BEFORE touching the unit. Avoided unnecessary touching the components or solder
pads on the circuit board. It is best to handle the unit by its front panel only.
Please unpack and inspect the unit for damage that may have occurred during transit. If
damage is found, notify the transportation company immediately. Only the consignee may
initiate a claim with the carrier for shipping damage. Crown will be happy to cooperate fully
as needed. Save the shipping carton as evidence of damage for the shipper's inspection.
Even if the unit arrived in perfect condition, as most do, save all the packing materials.
NEVER SHIP THE UNIT WITHOUT THE FACTORY PACK.
*A PIP2-compatible amplifier is necessary to use the IQ-PIP-USP3/CN. To determine if the amplifier is
PIP2 compatible, look for the logo on the back of the amplifier. The IQ-PIP-USP3/CN is NOT
compatible with older Crown PIP amplifiers.
page 7
Reference Manual