Crown IQ-PIP-USP3 Reference Manual page 43

IQ-PIP-USP3/CN
If you don't have the original carton, you may obtain a product service foam-in-place ship-
ping pack from Crown Factory Service at the number listed below. For non-warranty ser-
vice, you may also provide your own shipping pack, however we still recommend using a
Crown supplied shipping container. Minimum recommended requirements for materials
are as follows: 275 P.S.I. burst test Double-Wall carton that allows for 2-inch solid Styro-
foam on all six sides of unit or 3 inches of plastic bubble wrap on all six sides of unit;
securely seal the package with an adequate carton sealing tape. Do not use light boxes or
"peanuts." Damage caused by poor packing cannot be covered under warranty.
4. Do not ship the unit in any kind of cabinet (wood or metal). Ignoring this warning may
result in extensive damage to the unit and the cabinet. Accessories are not needed–do not
send the product documentation, cables and other hardware.
If you have any questions, please contact Crown Factory Service.
Reference Manual
Crown Factory Service
1718 W. Mishawaka Rd.
Elkhart, Indiana 46517 U.S.A.
Telephone:
574-294-8200
800-342-6939 (North America,
Puerto Rico, and Virgin Islands only)
Facsimile:
574-294-8301 (Technical Support)
574-294-8124 (Factory Service)
Internet:
http://www.crownaudio.com
page 43