Cornelius Quest NT 4000 Service Manual page 12

Quest Service Manual
8. While holding the pump halves together with your hand, reinsert
the four screws and tighten using a criss-cross pattern as
shown. The screws should be tightened about 1/4 turn beyond
snug.
9. Insert the two concentrate delivery tubes into the pump tubing
ends and secure them using the new hose clamps supplied in
the kit. Be sure to use pliers to squeeze and tighten the hose
clamps.
Publication Number: 720901117SER - 8 -
Fig. 3
© 2004, IMI Cornelius Inc.