Fujitsu Siemens Computers Primergy RX330 S1 Operating Manual page 52

Controls and displays
Indicators on the HDD module
Figure 12: Indicators on the HDD module
LED HDD BUSY
green
– lights: HDD in active phase
– does not light: HDD inactive (drive inactive)
LED HDD FAULT (in conjunction with a RAID controller)
red
– does not light: no HDD error
– Lit: HDD Faulty or Rebuild Stopped (drive defective/needs
replacing, a rebuild process was stopped or the HDD module is
not correctly inserted)
– Slow flashing: HDD Rebuild (the data is being restored after
changing a hard disk drive)
– Fast flashing: HDD Identify
– four fast blinks/pause: HDD Predicted Fault
– Two fast flashes/pause: HDD Hot Spare (Hot spare drive active.
The corresponding drive has failed).
52
HDD BUSY
HDD FAULT
Operating manual
Starting up and operation
RX330 S1