Download Print this page

Culligan 9" Installation & Operating Instructions Manual page 6

Automatic water conditioner

Advertisement

LOCATION
Space requirements - Allow 6-12 inches (15-30 cm)
behind the unit for plumbing and drain lines and 4 feet (1.3
meters) above for service access and filling the salt
container.
Floor surface - Choose an area with solid, level floor free of
bumps or irregularities. Bumps, cracks, stones and other
irregularities can cause the salt storage tank bottom to
crack when filled with salt and water.
Drain facilities - Choose a nearby drain that can handle the
rated drain flow (floor drain, sink or stand pipe). Refer to the
Drain Line Chart, Table 1 (page ---), for maximum drain line
length.
4 /
CULLIGAN
MARK 10 AUTOMATIC WATER CONDITIONER
®
NOTICE: Most codes require an anti-siphon device or airgap.
Electrical facilities - A 6-foot grounded cord is provided.
The customer should provide a 3-prong grounded receptacle,
preferably one not controlled by a switch that can be turned
off accidentally. Observe local electrical codes.
WARNING! ELECTRICAL SHOCK HAZARD! DO
NOT REMOVE THE GROUNDING PRONG! IF THE
RECEPTACLE IS DESIGNED ONLY FOR 2-PRONG
PLUGS, OBTAIN A 3-PRONG ADAPTER AND
GROUND IT SECURELY TO THE RECEPTACLE. DO
NOT USE EXTENSION CORDS.

Hide quick links:

Advertisement

loading

This manual is also suitable for:

12"Mark 10