Visslo F8 premier Operation Manual page 48

3) Be careful to decide lens materials.
Wrong choice may break the lens and leesen the use expectancy of the wheels.
4) Be sure to chamfer both sides of lens otherwise it may be able to give
hazards to hands.
5) Do not give excessive power to the stylus of tracing unit.
Stylus may be able to be bent or brocken and cause brakdown.
6) Be sure to fingers not to be held when you fix the lens to chuck.
7) Be sure to use cup remover from VISSLO when you take leapcup
off lens and take the leap cup with soft fabric if take it by naked hands
to avoid hazard against hands.
8) Be sure to the part of the body or other garbages not to be held in the
working part of stylus while tracing.It may cause breakdown.
7.2 Transfer
Caution
1) Be sure to seize the metal part of the equipment bottom certainly
and transfer by more than two persons.
2) Be sure to hands are not stuck between table and the equipment when
put down the equipment.
3) Be sure to transfer after fixing the equipment fixing unit certainly like
before installing.
Shock during transfer may be able to cause breakdown.
4) Be sure to use rated packaging materials to pack and then transfer.