Visslo F8 premier Operation Manual page 12

13. Indicate changed volume of the figures to enter
Use key and shows by 0.01, 0.1, 0.5(mm)
14. Indicate process steps
Layout Mode : steps to enter edging conditions
Measure process : steps to measure the thickness of lens
Controlled edging ,EX lens edging: Controlled edging,EX lens edging
Rough process : steps to edger roughing wheel
Bevel process : steps to bevel
Finish process : steps to edge delicate
Polish process : steps to polish
Groove process : steps to groove
Chamfer process : steps to chamfer
15. Shows the clamp is locked or not.
: chuck
16. Shows chamfered or not
: no chamferring
17. Lens materials
: Plastic
: Glass
18. Frame materials
: Metal
: unchuck
:Chamferring
: High index plastic
: Acrylic resin
: Celluloid
: Polycarbonate
*Front or Rear
*Both