Table of Contents
Advertisement
4.1.2 Data Controlled Edging
1) Choose edging conditions
:
:
2) Fix lens to adaptor
Ref.) Article 2 of 5.1.1. Automatic edging
3) Push
Measuring the thickness of lens and switched to simulation screen and system
is to be stopped.
STEP : 0.1
RATIO
LENGTH(mm)
*The steps on screen indicates the volume of increments,decrements to enter
and may be able to be switched to 0.01, 0.1, 0.5 by pushing
* MIN means minimum sized lens to be edged.
Ratio : Bevel ratio
Scale : "A" thickness
Total : ?
Section "B" : lens thickness ( minimum / maximum )
otherwise
and start edging
0.1
0.1
0.1
3.0 : 7.0
3.0 : 7.0
7.0
7.0
7.0
Fig.16 Screen of beveling shape
Section view posion line
key
- Quick Links:
- Chapter 1. Introduction
- Chapter 8. Error Code
Hide quick links:
Advertisement
Table of Contents
