Visslo F8 premier Operation Manual page 38

1) Change Parameter
-- -- --> > > > Initial Value of FPD --
Initial Value of PD
Height of Optical Center
BiF Chuck Layout Hor
BiF Chuck Layout Ver
Bevel Polish
Chamfering Mode
Barcode Memory
Check Cover Sensor
Text Display
Rework : Start from grooving
Rework : Remove chamfering
Tracing Mirror Image
Network Address
Exit
* Initial Value of FPD : Means FPD value, early assigned
* Initial Value of PD : Means PD value, early assigned
* Height of Optical Center : Means vertical distance between optical center
* BiF Chuck Layout Hor : Horizontal distance at near part side from bi-focal lens
* BiF Chuck Layout Ver : Vertical distance at far part side from bi-focal lens
* Bevel Polish : Means bevel polishing is available or not
* Chamfering Mode : Means chamfering is available or not
* Barcode Memory : Means bar code function is working or not
* Check Cover Sensor : May check cover sensor is working and
may not begin edging if chosse YES and cover is open.
* Text Display : Shows text menu.
* Rework : Start from grooving :
If YES, rework begins from grooving and if NO,only last process are repeating.
***** Change Parameter *****
and frame center
69.00
<--
62.00
2.0
5.0
5.0
Yes
F&R
No
Yes
Yes
No
No
R
No