Visslo F8 premier Operation Manual page 11

4. : Use when choose rimless polishing mode.
{(This key is not working in Type GLS(Glass)}
5. : Use when choose frame switching mode.
6. : Use when choose the sides of lens or right(R) or left(L)
7. : Use when choose in setting up the steps of the figures if change edging data.
8. : Use when choose specific menu.
9. : Use when move cursors
10. : Use when regulate the increments and decrements of edging data
11. : Use when transmit the traced data to screen panel.
12. : Use when change input shape of designed data
13
V(Vertical)
23
14
H(Horizontal)
25 26
24
15 16 17
MIN : 70.00
28
27
18
19
20
21
22