Chapter 3. The Input Of Edging Conditions - Visslo F8 premier Operation Manual

Chapter 3. The input of edging conditions

3.1. Choose edging conditions
1) Choose lens materials
: Plastic
: Glass
2) Choose frame materials
: Metal
: Nylon
3) Choose edging mode
: Auto mode
4) Choose polishing mode
: Polishing mode
5) Choose edging side
: Right
6) Choose Chamferring
: no chamferring
: High index plastic
: Acrylic resin
: Celluloid
: two-point
: Controlled mode
: No polishing
: Left
: Chamfering both
: Polycarbonate
: EX lens mode