Visslo F8 premier Operation Manual page 39

* Rework : Remove chamfering : Choosing chamfer or not in case rework
2) Regulate Size : Necessary compensation value for regulating lens size
-->
Finish Size
Finish Wheel Size Compensation
Polish Wheel Size Compensation
Minimum lens size for edging
* Finish Size : Compensate finish edging values per lens materials
* Finish Wheel Size Compensation : Compensate if finish wheel is abraded
* Polish Wheel Size Compensation : Compensate if polish wheel is abraded
* Minimum Lens Size for Grinding
3) Regulate rotation : Necessary compensation value for regulating rotation
Roughing extra rotation
-->
Finishing extra rotation
Polishing extra rotation
Grooving extra rotation
Chamfering extra rotation
PC lens extra rotation
Rotation limit
Exit
*** Fundamentally roughing wheel is to be moved after edging and
but in finish wheel edging the head is to rotated one more and finally
in polishing the edgeing could be completed after 4 more rotations.
* Roughing Extra Rotation : Could add more head rotations
* Finishing Extra Rotation : Could add more head rotations
* Polishing Extra Rotation : Could add more head rotations
* Grooving Extra Rotation : Could add more head rotations
* Chamfering Extra Rotation : Could add more head rotations
* PC Lens Extra Rotation : Could add more head rotations
***** Regulate Size ***
(PLA --> Bevel)
(PC --> Bevel)
(GLS --> Bevel)
(HPL --> Bevel)
(PLA ---> Flat)
(PC ---> Flat)
(GLS ---> Flat)
(HPL ---> Flat)
***** Regulate rortation *****
<--
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
18.90
<--
0
0
0
0
0
0
0
2