Visslo F8 premier Operation Manual page 33

when lens is fallen to wheel if take the chuck off on condition that wheel
is not stopped throughly.
4.2.2 Classifications by lens
4.2.2.1 EX lens edging
1) Choose edging conditions
:
:
2) Fix the lens to adaptor
Push leap cup forward and push
fix the lens, as keeping the standard point of leapcup
to the standard point of adaptor.
3) Push
Screen is to be switched to simulation screen after measuring the thickness of
lens and then system is to be stopped.
STEP : 0.1
RATIO
LENGTH(mm)
: Position line of section viewing is rotated clockwise.
: Position line of section viewing is rotated unclockwise.
Push
Move the postion line of section viewing to the thinnest place of
or
and start edging
6.0 : 4.0
6.0 : 4.0
or again to stop the position line of section viewing
and
MIN : 70.00