Genlock Menu; Cable Menu - JVC RM-HP250DE Instructions Manual

GENLOCK Menu

This menu is used to set the camera cable length to the length actually used.
( REF. : "Adjustments for Genlock Operation" on page 13.)
No. Item
1A SD H PHASE
1B HD H PHASE
1C SC COARSE
1D SC FINE
1Z BACK
Either "1A: SD H PHASE" or "1B: HD H PHASE" will appear depending on the VIDEO FORMAT of the camera.
Although the setting range for SD H PHASE is from -128 to 127, this range varies depending on the connected camera. In the
case of GY-HD250/GY-HD251, the available setting range is between -32 and 87.

CABLE Menu

This menu sets the camera cable length according to the actual length used.
( REF. : "Camera Cable Length Setup" on page 12.)
No. Item
2A LENGTH
2Z BACK
Function, Operation
Adjustment of the Horizontal sync phase of genlocking.
Adjustment of the Horizontal sync phase of genlocking.
Coarse adjustment of the color phase of genlocking.
Use a vectorscope, etc.
Fine adjustment of the color phase, which should be performed
after completing the SC COARSE adjustment.
If the subcarrier cannot be adjusted with SC FINE, restart the
adjustment from SC COARSE.
Return to the previous display.
Function, Operation
Set according to the total length of the camera cables in use.
Return to the previous display.
Menu Operation
Available Settings Initial Setting
-128 to 0 to 127 0
-1024 to 0 to 1023 0
0°, 90°, 180°, 270° 0°
-128 to 0 to 127 0
– –
Available Settings Initial Setting
5M, 20M, 50M, 20M
100M
– –
21