Table Of Contents; Features - JVC RM-HP250DE Instructions Manual

Introduction
Thank you for purchasing this JVC product.
Before operating this unit, please read the instructions care-
fully to ensure the best possible performance.
These instructions are for RM-HP250AU/RM-HP250DE.
Contents
Safety Precautions
Introduction
Features ........................................................................... 2
Precautions for Proper Use ............................................. 3
Controls, Connectors and Indicators ............................... 4
Front panel ................................................................... 4
Rear panel .................................................................... 6
Connection
Example of Basic Connection .......................................... 8
Example of Connection with 2 Units ................................ 9
Rack Mounting ............................................................... 11
Turning the Power ON .................................................... 11
Preparations and Main Functions
Camera Cable Length Setup ......................................... 12
Adjustments for Genlock Operation ............................... 13
Intercom ......................................................................... 14
Camera Operator Call .................................................... 14
Tally ................................................................................ 14
Function Keys ................................................................ 15
Camera Adjustments
Shutter Speed Adjustment ............................................. 16
Gain Adjustment ............................................................ 17
Iris Adjustment ............................................................... 17
White Balance Adjustment ............................................. 18
Menu Operation
Flow of Menus ............................................................... 19
Menu Setup Method ...................................................... 20
GENLOCK Menu ........................................................... 21
CABLE Menu ................................................................. 21
FILE Menu ..................................................................... 22
PROCESS Menu ........................................................... 23
OPERATION Menu ........................................................ 25
LCD MODE Menu .......................................................... 26
SYSTEM Menu .............................................................. 26
General
Warning Messages ........................................................ 28
Error Messages ............................................................. 28
Operable camera features ............................................. 29
Operation of connected camera .................................... 30
Troubleshooting ............................................................. 31
Specifications ................................................................. 32
2

Features

This is a remote control unit to program the HD studio system
together with the HD camera recorder (GY-HD250/GY-HD251)
and studio adapter (KA-HD250U).
Maximum 100m of HD analog component signals
can be transferred
You can use the optional camera cable VC-P110 series to
extend the distance between the camera and the remote
control unit up to 100m and transfer the HD analog
component signals.
There is no need to prepare a separate power source as
the power to the studio adapter will be supplied by RM-
HP250.
Equipped with HD/SD SDI connector
The unit can outputs (3 outputs) transferred signals as SDI
signals via camera cables. It can be connected to SDI
switcher, monitor or other VTR equipment.(RM-HP250AU)
The unit can distribute and output (2 outputs) the input SDI
signals from the SDI input connector. It can be connected
to SDI switcher, monitor or other VTR equipment.(RM-
HP250DE)
The camera can be remotely controlled.
The camera can be remotely controlled by serial
communication. You can also control the camera by
connecting the optional remote control panel RM-LP25U.
External synchronization of HD studio system is
possible
External synchronization of SD reference sync signal or
(VBS or BB), HD tri-level reference sync signal for HD studio
system is possible. H phase and SC phase (SD signal) can
be adjusted on the front panel.