Specifications - JVC AA-V200E Instructions Manual

CHARGE Lamp
Status
Charging
Charging completed
Charging standby mode The lamp blinks.
During Use . . .
● The charging begins in the order of battery attachment.
• When the first battery charging is completed, the other
charging starts.
• The charging on the mount "1" begins first when two
batteries are attached simultaneously or the AC power
cord is plugged into AC outlet after the battery packs are
attached.
● You can use any of the mount when you charge only
one battery.
● The battery charger is specifically designed to charge
the battery packs BN-VM200U.
● When charging a brand new battery pack, or one that
has been in storage for an extended period, the
CHARGE lamp may not come on. In this case, remove
the battery pack, then reattach and try charging again.
● Vibration noise can sometimes be heard coming from
the inside of the battery charger. This is normal.
Condition
The lamp lights up.
The lamp lights off.
● The battery charger processes electricity internally, and
will become warm during use. This is normal. Make
sure to use the battery charger in well-ventilated areas
only.
● If the battery operation time remains extremely short
even after having been fully charged, the battery is worn
out and needs to be replaced. Please purchase a new
one.

Specifications

Power AC 110 V – 240 Vd, 50/60 Hz
Output power DC 8.4 V
Charging 10°C to 35°C
temperature
Dimensions 128 mm (W) x 41 mm (H) x
65 mm (D)
Weight Approx. 160 g
, 0.65 A
7
EN