Troubleshooting; Specifications - JVC AA-VC20U Instructions Manual

Troubleshooting

Trouble
The charging lamp does not
light up.
The charging lamp blinks
during charging.
The battery charger is getting
hot.
Battery is fully charged but the
shooting time is short.

Specifications

General
Item
AC adapter input AC 100 V to 240 V, 50 Hz/60 Hz
voltage
Input DC 12 V, 3.0 A
Output DC 8.4 V, 3.4 A / 1.7 A
Allowable operating 0 °C to 40 °C (32 °F to 104 °F)
temperature
Mass Approx. 150 g
Supported BN-VC296G, BN-VC2128G
battery
* Charge only the battery specified in this manual.
Dimensional Outline Drawing (Unit: mm)
.
* The specifications and appearance of this product are subject to changes for further improvement
without prior notice.
8 EN
The charging lamp may sometimes not light up for batteries that are
recently purchased or have been kept for a long time. In these cases,
remove the battery and charge it again.
Are you charging the battery under low (0 °C and below) or high (40 °C
and above) temperature?
Charge the battery in an environment between 0 °C and 40 °C. If the
surrounding temperature is too low or high, charging may stop in order to
protect the battery.
This is not a malfunction.
Battery life is expiring. Replace the battery.
Description
131 mm
Action
Accessories
Accessories
Warranty Card (for USA)
INSTRUCTIONS
AC Adapter
Power Cord (U model: 1, E model: 2)
* The warranty card is included in the instruction
manual.
1
1
1