Installing The Master Key Labels - Niles IntelliControl ICS Installation And Setup Manual

INSTALLING THE MASTER KEY LABELS

TO INSTALL THE MASTER KEY LABELS (Figure 6):
1. Locate the Master Key keycaps. (Keycaps DO NOT come installed for
the iRemote).
2. Place labels from the included label sheet face down inside the keycap.
3. Place the caps in the appropriate key locations. (Refer to the GXR2 Installation
Worksheet to assure proper position).
Note: Keycaps may need noticeable force to install correctly.
Figure 6.
Step 1: Label sheet removal.
Step 3: Place keycap over Master Key and snap into place.
iRemote shown.
GETTING STARTED
Step 2: Insert label face down in keycap.
Display Keypad shown.
Single Keypad shown.
(800) BUY-HIFI NILES AUDIO CORPORATION
25