Extron electronics Matrix 50 Series User Manual page 3

Quick Start — Matrix 50 Series Switchers
Installation
Step 1
Mount the switcher in a rack.
Step 2
Turn off power to the input and output devices,
and remove the power cords from them.
Step 3
Cable the switcher for RGsB, RsGsBs, HDTV/
component video, S-video, or composite video
input and output (3).
Step 4
Cable audio models for stereo audio input. Each
input has a 3.5 mm, 5-pole captive screw
connector for balanced or unbalanced stereo
audio (4). High impedance is generally over
800 ohms.
Step 5
Cable audio models for stereo audio output.
Each output has a 3.5 mm, 5-pole captive screw
connector that outputs the selected unamplified,
line level audio. Connect an audio device, such
as an audio amplifier or powered speakers (5).
Step 6
If desired, connect a control system or computer
to the Remote RS-232/RS-422 port (6).
Step 7
If desired, attach an external sync timing device
to the external sync connectors (7).
Step 8
Plug the switcher and input and output devices
into a grounded AC source, and turn on the
input and output devices.
Definitions
Tie — An input-to-output connection.
Set of ties — An input tied to 2 or more outputs.
(An output can never be tied to multiple inputs.)
Configuration — One or more ties or sets of ties.
Current configuration — The currently active
configuration (also called configuration 0).
Global preset — A configuration that has been
stored. One preset can be assigned to each input
button. When a preset is retrieved from memory,
it becomes the current configuration.
3
Composite
S-video video
HDTV
5
Tip
See warning
Sleeve
Tip
See warning
Unbalanced Output
Tip
Ring
Sleeve (s)
Tip
Ring
Balanced Output
5 1
6
9 6
Female
P n i R S 2 - 2 3 F u n t c o i n
1 — N t o u e s d
2 T X T a r s n m t i d a a t
3 R X R c e i e e v d a a t
4 — N t o u e s d
5 G n d S g i n l a g o r u n d
6 — N t o u e s d
7 — N t o u e s d
8 — N t o u e s d
9 — N t o u e s d
7
Timing source Matrix 50 switcher
OUT
4
Tip
Sleeve
Tip
Sleeve
Unbalanced Input
(high impedance)
Tip
Ring
Sleeve (s)
Tip
Ring
Balanced Input
(high impedance)
600 ohms
Tip
Ring
Sleeve (s)
Tip
Ring
600 ohms
Balanced Input
(600 ohms)
Connect the
sleeve to ground.
Connecting the
sleeve to a
negative (-)
terminal will
damage the audio
output circuits.
1 5
6 9
Male
R S 4 - 2 2 F u n t c o i n
T - X T a r s n m t i d a a t ) - (
T X + T a r s n m t i d a a t ( ) +
R X + R c e i e e v d a a t ( ) +
R - X R c e i e e v d a a t ) - (
G n d S g i n l a g o r u n d
— N t o u e s d
— N t o u e s d
— N t o u e s d
— N t o u e s d
To next device