Cool Share Web-Programmable Thermostat Residential Carrier® Thermostat Quick Reference Guide Thank you for taking an active role in helping reduce the region’s demand for electricity during the summer. Participating in Nevada Power’s Cool Share program, our central air conditioning cycling program, lets valuable customers like you save energy – and money – while protecting the environment, during the hot summer months.
Getting to Know Your Cool Share Thermostat proGraM Button MoDe Button Copy previous Day Button Fan Button enD Button HoLD Button CHanGe Day Button COPY PREVIOUS DAY PROGRAM MODE reseT FiLTer Button CHANGE DAY up anD DoWn Buttons SET TIME/TEMP RESET FILTER HOLD seT TiMe/TeMp Button...
Setting mode operation Press MODE button. When the MODE button is pressed, the words OFF, HEAT, COOL, and AUTO will rotate on the display. If you have a heat pump, the display will show OFF, HEAT, COOL, AUTO, and EHEAT. NOTE: In AUTO mode, your system will heat or cool as needed to reach your temperature settings.
Press the END button when you finish entering your comfort schedule. NOTE: Once you’ve programmed your comfort schedule, the thermostat will continue operating on that program until you enter an alternative schedule. It may be appropriate to adjust temperatures as seasons change.
Page 5
Go to NevadaPower.com/CoolShare and click on the “New Residential Sign Ups” button to be taken to the Homeowner/Residential page of the Cool Share program website. Click on the “CARRIER THERMOSTAT” link. Follow the instructions to reach the Welcome screen shown in Figure 1 below: Figure 1: Welcome Screen Click on Go to proceed to the Login screen.
Page 6
Enter your user name and password. Then, click the Go button. NOTE: Your username will be your Premise ID. Your default password will be given to you by the installer, and can be found on the front cover of this brochure. If this is your first log in, you will be presented with a Privacy and User Agreement.
Click on the arrow to view the Fan settings. Select the desired setting from the pull-down menu. The normal setting for the fan is “Auto”, which runs the fan when your heating or cooling equipment is running. To run the fan continuously, select “On”. Make changes as desired, and click the “Send”...
Page 8
You must now select a method for creating, viewing, or editing the schedule. • Select “Step by Step” to use the help wizard, which will give you step-by-step assistance. NOTE: This method is recommended if you are a novice user. •...
Page 9
FREE Carrier thermostat may be better. Does this thermostat replace all of the ones I already have? Yes. We will replace all of your thermostats with the new Carrier thermostat. You may, however, keep your old thermostats. Do I need to have an internet connection to use this new web-programmable Thermostat? No.
Need help?
Do you have a question about the Cool Share Web-Programmable Thermostat and is the answer not in the manual?
Questions and answers