Setting Mode Operation; Setting Your Comfort Schedule - Carrier Cool Share Web-Programmable Thermostat Quick Reference Manual

Setting mode operation

1. Press MODE button.
2. When the MODE button is pressed, the words OFF, HEAT, COOL, and AUTO will rotate on
the display. If you have a heat pump, the display will show OFF, HEAT, COOL, AUTO, and
EHEAT. NOTE: In AUTO mode, your system will heat or cool as needed to reach your
temperature settings. AUTO mode may be turned off. Contact your indoor weather expert
for details.
3. Continue to press the MODE button until you reach the desired setting.

Setting your comfort schedule

1. Press the PROGRAM button. The word PROGRAMMING appears on the display and the word
TIME flashes on the display. Above the clock, the word WAKE, DAY, EVE, or SLEEP will appear.
The day to be programmed is displayed with a 2-letter abbreviation: MO, TU, WE, TH, FR, SA, or
SU. NOTE: Your thermostat will always start the programming process in the current time period
and current day. You may wish to begin programming on a different day or time period. To change
the time period, press the PROGRAM button as needed until the correct time period, WAKE,
DAY, EVE, or SLEEP appears. Press the CHANGE DAY button to display the desired day.
2. Using your personalized comfort schedule as a guide, press the UP and DOWN buttons
to set the time for the indicated time period.
3. Press the SET TIME/TEMP button. The word HEAT flashes on the display. NOTE: Pressing the
SET TIME/TEMP button allows you to select between HEAT, COOL and TIME settings.
4. Press the UP and DOWN buttons to adjust the heating temperature setting to match your
personalized comfort schedule.
5. Press the SET TIME/TEMP button to select the cooling temperature setting for this time period.
The word COOL flashes on the display.
6. Press the UP and DOWN buttons to adjust the cooling temperature setting listed in your
personalized comfort schedule. NOTE: Don't forget, your COOL setting must be at least 2°
higher than your HEAT setting. Your thermostat will automatically change your previously set
temperature to maintain that 2° difference.
7. Press the PROGRAM button to advance to the next time period. Following your personalized
comfort schedule, enter times and temperatures for DAY, EVE, and SLEEP time periods. You
have now programmed 1 day into your thermostat. At this time, you can either repeat steps
1-7 until all days of the week have been programmed, or you can copy the schedule onto the
remaining days of the week. See the section on "Copying a daily schedule" for details. NOTE:
During programming, if you have not touched a button or made an entry within 3 minutes, the
programming mode will automatically shut off. Anything you have programmed will be saved.