With A Lap/Shoulder Belt - Honda TL 2010 Owner's Manual

09/07/29 16:50:43 31TK4610_054
TETHER STRAP HOOK
ANCHOR
7. Route the tether strap over the
head restraint, then attach the
tether strap hook to the anchor,
making sure the strap is not
twisted.
8. Tighten the tether strap as
instructed by the child seat maker.
9. Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Installing a Child Seat with a Lap/
Shoulder Belt
COVER
When not using the LATCH system,
all child seats must be secured to the
vehicle with the lap part of a lap/
shoulder belt.
In addition, the lap/shoulder belts in
all seating positions except the
driver's have a lockable retractor
that must be activated to secure a
child seat.
Installing a Child Seat
1. With the child seat in the desired
seating position, route the belt
through the child seat according
to the seat maker's instructions,
then insert the latch plate into the
buckle and remove any slack from
the lap portion of the belt.
CONTINUED
49