Adding Engine Oil - Honda TL 2010 Owner's Manual

09/07/29 18:28:13 31TK4610_514
ENGINE OIL FILL CAP
Unscrew and remove the engine oil
fill cap on top of the valve cover.
Pour in the oil slowly and carefully so
you do not spill. Clean up any spills
immediately. Spilled oil could
damage components in the engine
compartment. Install the engine oil
fill cap, and tighten it securely. Wait
a few minutes, and recheck the oil
level (see page 448 ). Do not fill
above the upper mark; you could
damage the engine.
Recommended Engine Oil
Oil is a major contributor to your
engine's performance and longevity.
Always use a premium-grade 5W-20
detergent oil displaying the API
Certification Seal. This seal indicates
the oil is energy conserving, and that
it meets the American Petroleum
Institute's latest requirements.
API CERTIFICATION SEAL

Adding Engine Oil

Acura Motor Oil is the preferred
5W-20 lubricant for your vehicle. It is
highly recommended that you use
Acura Motor Oil in your vehicle for
optimum engine protection. Make
sure the API Certification Seal says
''For Gasoline Engines.''
CONTINUED
509