Driving Position Memory System - Honda TL 2010 Owner's Manual

09/07/29 17:09:58 31TK4610_169

Driving Position Memory System

Your vehicle has a memory feature
for the driver's seat and outside
mirror positions.
Seat, except for power lumbar, and
outside mirror positions can be
stored in separate memories. You
select a memorized position by
pushing the appropriate button or
using the appropriate remote
transmitter or the keyless access
remote (Driver 1 or Driver 2).
164
Storing a Driving Position in
Memory
Store a driving position only when
the vehicle is parked.
Turn the ignition switch to the
1.
ON (II) position. You cannot add a
new driving position to the
memory unless the ignition switch
is in the ON (II) position. You can
recall a memorized position with
the ignition switch in any position.
: Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
178 and 181 .
2. Adjust the seat to a comfortable
position (see page 155 ).
Adjust the outside mirrors for best
visibility (see page 162 ).
MEMORY BUTTONS
SET BUTTON
3. Press and release the SET button
on the control panel. You will hear
a beep. Immediately press and
hold one of the memory buttons (1
or 2) until you hear two beeps.
The indicator in the memory
button will come on. The current
positions of the driver's seat and
outside mirrors are now stored.