Honda TL 2010 Owner's Manual page 98

09/07/29 16:58:14 31TK4610_097
Multi-Information Display
Keyless Memory Settings
You can customize some vehicle
control settings. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park (automatic) or
with the parking brake set (manual).
If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, move the shift lever out of
Park (automatic) or release the
parking brake (manual), the display
will change to the normal screen.
92
TM : Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0),
ACCESSORY Mode is the
equivalent of ACCESSORY (I),
and ON Mode is the equivalent
of ON (II). For more
information, see pages
181 .
If you try to enter the customizing
mode while the vehicle is moving,
you will see a ''MUST STOP AND
SHIFT TO PARK TO CHANGE
SETTINGS'' (automatic) or ''MUST
STOP AND SET PARK BRAKE TO
CHANGE SETTINGS'' (manual)
message and you cannot change the
settings.
178 and You can customize some vehicle
control settings for ''DRIVER 1'' and
''DRIVER 2'' separately.
To have the driver's ID detected,
make sure the driver's door is
unlocked with a corresponding
remote transmitter/keyless access
remote.