Honda TL 2010 Owner's Manual page 273

09/07/29 17:32:48 31TK4610_272
Playing a USB Flash Memory Device (Models without navigation system)
SCAN FLD This function
samples the first file in each folder in
the order they are stored. To
activate the folder scan feature,
press and release the SCAN button
repeatedly. You will see F-SCAN in
the display. You will get a 10 second
sampling of the first file in each
folder. Press and hold the SCAN
button to get out of the folder scan
mode and play the last file sampled.
You can also select the folder scan
feature from the menu items with
the selector knob (see page
Select normal play to turn either
scan feature off. Pressing either side
of the CATEGORY or SKIP bar also
turns off the feature.
To Stop Playing a USB Flash
Memory Device
To change modes, press the AM/
FM or button. Press the CD
button to switch to the disc mode (if
a disc is loaded). Press the AUX
button to switch the audio mode
between the USB or
Audio.
You can also press the MODE
button on the steering wheel to
change modes.
265 ). If you reconnect the same USB flash
memory device, the system will
begin playing where it left off.
Disconnecting a USB Flash Memory
Device
You can disconnect the USB flash
memory device at any time even if
the USB mode is selected on the
audio system. Make sure to follow
the USB flash memory device's
instructions when you remove it.
USB Flash Memory Device Error
Messages
If you see an error message in the
display, see page
Bluetooth
268 .
267