Honda TL 2010 Owner's Manual page 528

09/07/29 18:30:47 31TK4610_527
Lights
RESERVE TANK
STAY
To change a bulb on the
passenger's side, remove the
engine coolant reserve tank by
pulling it out of its stay.
522
BULB
CONNECTOR
3. Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
4. Remove the bulb by turning it one-
quarter turn counterclockwise.
5. Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
6. Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
7. Turn on the headlights to test the
new bulb.
8. (Driver's side)
Install the upper part of the air
intake duct securely. Reinstall the
holding clips.
9. (Passenger's side)
Install the engine coolant reserve
tank.
10. Install all engine compartment
covers.