Replacing The Armrest Assembly - Invacare ProntoM41 Service Manual

®
Invacare - PRONTO M41
7.1.2

Replacing the Armrest Assembly

●
If necessary, remove the joystick. Refer to chapter 8.11.1.
●
Remove the mounting screw (6), three washers (5), and locknut (4) that secures the existing
armrest (1) to the arm post.
●
Discard the old/existing armrest (1).
●
Position the new armrest (1) on the armrest post (3) and secure with the mounting screw (6),
three washers (5), and locknut (4).
●
If necessary, install the joystick. Refer to chapter 8.11.1.
●
Repeat the first four steps for the opposite armrest if necessary.
SERVICE MANUAL
29