®
Invacare
- PRONTO M41
6
Test procedures
6.1
Testing the motor
1
Cap
2
Motor
3
4-pin motor connector
●
On the 4-pin motor connector (3), locate the two contacts in the RED and BLACK housings.
●
Set the digital multimeter to measure resistance (ohms).
●
Measure the resistance between the two motor contacts.
Note
A normal reading is between 0.5 and 5 ohms. A reading of 0 ohms or in excess of 15 ohms
indicates a problem. High readings are generally caused by bad connections and/or damaged
brushes. Contact Invacare.
SERVICE MANUAL
23