SERVICE MANUAL
7.5
Standard seat
Note
A nut is fixed between the two washers (2) and (4) as a spacer so that the belt mounting can
rotate freely.
●
Remove the plastic cap (5).
●
Loosen the bolt (3) and the associated nut
(in the figure this is covered by the plastic
cap) with a 5 mm Allen key and a 13 mm
socket spanner.
●
Remove the nut.
●
Remove the bolt including safety belt and flat
washers (2) and (4).
●
Remove the flat washers (4).
●
Replace the safety belt (1).
●
Refit the parts in the reverse order.
38
®
Invacare
- PRONTO M41