Ford C-MAX HYBRID 2013 Modifiers Manual page 40

Electrical
4. Select the appropriate wire splice for the wires to be spliced from Rotunda Wire Splice Kit
164-R5903.
5. Note: Rotunda Pro-Crimper 164-R5901 supplied with the wire splice kit is the only tool that
can be used with these splices.
Identify the appropriate chamber on the Rotunda Pro-Crimper by matching the wire size on the
dies with the wire size stamped on the butt splice.
(1) Cavity
(2) Indenter
6. Crimp the connector.
(1) Center one end of the wire splice in the appropriate crimping chamber.
(2) Insert stripped wire into the barrel.
(3) Holding the wire in place, squeeze the tool handles until ratchet releases.
7. Repeating Step 6, crimp the other half of the splice.
FCS-212235-13
Section 2: Electrical
2-25
March 2013