Ford C-MAX HYBRID 2013 Modifiers Manual page 35

2-20
For retainer screws, the following guidelines apply:
• Avoid using fasteners that are too long for the application or are in an area which might damage
vehicle components, including wiring, brake lines, fuel tank and lines, powertrain components,
exhaust system and suspension.
• Do not use pointed screws for attachments. Also check that screws used in the vicinity of the
wiring are blunt-ended.
• To minimize the potential for wiring shorts, do not use drill point screws. Trim components
(including wiring shields) should use pin-type attachments instead of screws.
• Always check areas that screws protrude into for verification that an interference condition to
other components does not exist.
• Make sure that retainers used are capable of withstanding the environment over the vehicles life
expectancy.
FCS-212235-13
Section 2: Electrical
Electrical
March 2013