Display Contrast / Brightness; Standby; Memory; Temperature Unit - Miele PW 6065 Plus Sluice Operating And Installation Instructions

Settings menu J

Display contrast / Brightness

There are ten different display
contrast and brightness settings.
The display contrast / brightness will
change as soon as a different setting is
chosen.
^ Confirm your selection with the
multi-function selector.

Standby

To save energy, the display goes out
after 10 minutes and the Start button
flashes slowly.
Operating the multi-function selector or
one of the short cut buttons switches
the display back on again.
There are three options:
On
Standby comes on:
– if a programme is not selected within
10 minutes of the machine being
switched on.
– 10 minutes after a programme has
started.
– 10 minutes after the end of a
programme.
Not in current prog. (the machine is
delivered with this option selected)
Standby comes on:
– if a programme is not selected within
10 minutes of the machine being
switched on.
66
Off
The display remains on all the time.

Memory

If an extra option has been selected
for a programme, or the
recommended temperature or spin
speed has been altered, the machine
will store the changes in memory at
the start of a programme.
The next time this programme is
selected these settings will appear in
the Programme selection menu.
The memory function is not active when
favourite programmes are selected
using the short cut buttons.
The machine is delivered with the
memory function deactivated.

Temperature unit

You can chose for the temperature to
be displayed as °C/Celsius (default
setting) or °F/Fahrenheit .
The machine is delivered with the °C
option selected.