Miele PW 6065 Plus Sluice Operating And Installation Instructions page 71

Pre-wash water
You can choose for the pre-wash to
be carried out with either hot or cold
water (not available with the Curtains
programme). Hot water can only be
only taken in if the wash temperature
is above 30°C.
The machine is delivered with the Hot
water option selected.
Main wash water
You can choose for the main wash to
be carried out with either hot or cold
water (not available with the
Woollens , Silks , Curtains and
Proofing programmes). Hot water can
only be only taken in if the wash
temperature is above 30°C.
The machine is delivered with the Hot
water option selected.
If the machine is not connected to
the hot water supply, the programme
durations will be longer and will vary
from the time remaining shown in the
display.
The machine will need to be set up
specifically for Recycled water if this
option is selected.
Settings/Supervisor level menu
Rinse water
You can choose for the rinses in the
Cottons , Minimum iron , Kitchen linen ,
Towelling and Sluice programmes to
be carried out with either hot or cold
water. Hot water can only be only
taken in if the wash temperature is
above 50°C.
The machine is delivered with the Hot
water option selected.
The machine will need to be set up
specifically for Recycled water if this
option is selected.
Low water pressure
This setting can be activated to
ensure problem free water intake
where the water pressure is
constantly low (below 100 kPa).
The machine is delivered with this
option deactivated.
71