Installation On A Raised Plinth; Washer-Dryer Stack; Payment System - Miele PW 6065 Plus Sluice Operating And Installation Instructions

Installation and connection
The washer-extractor is not suitable
for building under.

Installation on a raised plinth

The machine can be installed on a steel
plinth base (available open or closed)
or on a concrete plinth.
^ Secure the front feet of the
washer-extractor with the clamps
supplied when installing on a
concrete plinth.
^ Follow the fitting instructions
supplied.

Washer-dryer stack

A Miele tumble dryer can be stacked
on top of this washer-extractor. The
appropriate stacking kit* (WTV) is
required.
The stacking kit must be fitted by a
Miele authorised service technician.
52
Replacing the lid
If the lid has been removed in order to
fit the washer-dryer stack, ensure that, if
the lid is ever replaced, it fits securely
into the rear holders. Otherwise, it is not
properly secure for transport.

Payment system

This washer-extractor can be fitted with
a payment system.*
This must be connnected and
programmed by a Miele service
technician or authorised dealer.
Coins / tokens must be removed
from the payment system regularly,
otherwise it will become blocked.
Automatic switch-off devices, such
as timers, must not be fitted to this
machine as the machine must
remain connected to the electricity
supply so that the drum door can be
opened.
The sticker supplied with the text: "This
machine must be connected to the
electricity supply to allow the door to be
opened. On no account should the
door be opened with force." should be
placed near to the machine where it
can be seen easily.
* All items marked * are available to
order from your Miele Dealer or from the
Miele Spare Parts Department.