Disassembly/Assembly
Radio
Reassembly—
Detailed
PTT Reassembly
52
The following steps describe how to reassemble the radio. This includes the following
major components:
•
PTT
•
Keypad/option board
•
Display
•
Speaker, microphone, universal connector flex
•
Chassis
•
Backup Battery
•
Chassis and front cover
1.
Put the PTT seal in the PTT bezel.
2.
Align the PTT bezel and seal to the front cover housing so that the bottom tabs will
engage with the opening in the front cover.
3.
Slide the PTT bezel down so that the T-tab engages into the front cover opening.
4.
Snap the top snaps.
NOTE:
Look inside the front cover to be sure the T-tab and snaps
are fully engaged with the front cover.
Figure 38. PTT Removal