2-8
2.7
Radio Reassembly — Detailed
2.7.1
RF Board Reassembly
1. Place the RF board on the rear diecast.
2. Tighten the screws and the stud.
2.7.2
Control Board Reassembly
1. Place the control board on the RF board.
2. Connect the control board to the RF board by pressing it firmly downwards at the board-to-
board connector (
Board-to-board
Connector
3. Tighten the screws using a screwdriver to hold the control board in place.
2.7.3
Chassis and Front Cover Reassembly
1. Remove the metal retainer with a small flat head screwdriver (
Housing tab
August 30, 2002
).
See Figure 2-7.
Figure 2-7.
Figure 2-8.
Maintenance: Radio Reassembly — Detailed
See Figure 2-11.
Retainer
).
99R85452E01-O