Skyvue SKY5230 Owner's Manual page 19

Watching TV
CH Search (Channel search)
Channel auto search makes the TV look for all
channels viewable in the set area.
8
When "Air" is selected in Antenna setting:
Press c / d to select "Start", and then press
ENTER.
Start
When "Cable" is selected in Antenna setting:
1 Press a / b to select "Analog & Digital Search
Start" to search both analog and digital
broadcasts, or to select "Analog Search Start"
to search only analog broadcasts, and then
press ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel",
and then press ENTER.
2 The Channel search results may include
scrambled channels or channels that are not
viewable in the set area. Press c / d to select
"Yes", and then press ENTER to remove
scrambled channels.
2012 SKYVUE
LC-80LE633U_70_60_52LE640U_C6400U_E.indb 19
Cancel
Analog & Digital Search Start
Analog Search Start
Cancel
Yes
No
Completed
9
The settings confi rmation screen is displayed.
Confi rm the information displayed on the screen,
and then press ENTER.
Examples of the settings confi rmation screen
When one or more channel is received after
"Antenna & Cable" was selected in step 6 and a
search was carried out.
Language
Location & Time
TV Location
Antenna & Cable/STB
Air/Cable
Search Result
Press the INPUT button,
then the right arrow d,
to see the list of channels found.
When no channel is received after "Antenna &
Cable" was selected in step 6 and a search was
carried out.
Language
Location & Time
TV Location
Antenna & Cable/STB
Air/Cable
Search Result
Channel not found.
Antenna/Cable are not properly connected
or Air/Cable setup is incorrect.
Please check your Antenna/Cable connection
and Air/Cable setup.
When "Set-top box" was selected in step 6 and a
search was carried out.
Language
Location & Time
TV Location
Antenna & Cable/STB
TV Input Skip
Please make sure to change INPUT to the
specific input terminal you are connecting
your set-top box to get the picture.
Closed caption, sub-channel audio
and channel selection need to be selected
with your set-top box.
• If no channel is found, confi rm the type of connection
made with your TV and try "EZ Setup" again.
• For changing the settings of the Initial Installation, perform
"EZ setup.
• To see the list of channels found during Channel search,
press INPUT, and then press
: English
: United States/EST/Auto
: Home
: Antenna & Cable
: Air
: Digital 4ch
Analog 7ch
OK
: English
: United States/EST/Auto
: Home
: Antenna & Cable
: Cable
: No channel
OK
: English
: United States/EST/Auto
: Home
: Set-top box
: On
OK
d
.
19
2012/01/05 16:20:29