Table of Contents
Advertisement
Maintaining and servicing your set
Replacing the lamp in your extended vision caboose
Y
our caboose is illuminated by one lamp (Lionel part no. 161300). During the course of
normal operations, you may find that your lamp requires replacement. Replacement
lamps are available at your authorized Lionel Service Center or from Lionel Service.
Follow these steps to replace the lamp.
1. Remove the screw from each end of the caboose. As illustrated in Figure 10, the screws are
located just above the platforms.
2. Lift the body off the frame.
3. Lift the window shell off the frame.
4. Remove the expired lamp and install the replacement (Lionel part no. 161300).
See Figure 16.
5. Reassemble the car, securing the body to the frame with the two screws.
Figure 16. Caboose lamp replacement
Remove the
screw from
both ends
25
Lionel part no.
161300
Advertisement
Table of Contents
