Table of Contents
Advertisement
Operating and servicing your train set
Replacing the lamp in your Porthole Caboose
D
uring the course of normal operations, the lamp inside your Porthole Caboose may
require replacement. Follow these steps and refer to Figure 12 as you replace the lamp.
1. Remove the four screws from the underside of the car.
2. Lift the body off the frame.
3. Pull the lamp out of the socket and replace it with part no. 600-0161-300, available from
your authorized Lionel Service Center or Lionel Service in Chesterfield, MI.
4. Place the body back onto the frame and replace the four screws.
Figure 12. Lamp replacement
Bottom of caboose
Body screws
33
Lamp no. 600-0161-300
Advertisement
Table of Contents
