Running your train
Expanding the Maxi-Stack into a unit train (continued)
3. Install the female articulating connector using the screw removed in step 2.
4. On the second Maxi-Stack Set, remove the truck from the brakewheel end. Again, use a
3/16" nut driver to remove the hex-head screw (labeled "B" in Figure 4) from the bottom
of the truck.
5. Remove the Phillips head screw (labeled "C" in Figure 9) from the bottom of the brake-
wheel platform on the second Maxi-Stack.
6. Install the male articulating connector using the screw removed in step 5.
7. Pass the plain truck shoulder screw (labeled "A" in Figure 9) through the plain truck and
into the male and female connectors as illustrated in Figure 8.
Plain truck
Figure 8. Installing the plain truck
Shoulder Screw A
13
13