Yeti Cycles 2012 asr 5 Owner's Manual page 4

perfeCtly tuned
suspension translates
to a lively, aggressive
feel on the trail.
1. hiGh mODUlUs CarBOn FiBer rear trianGle
2. COmpatiBle with 120 Or 140mm FOrks
3. allOy DOGBOne
4. tapereD heaDtUBe
5. rear shOCk By FOx raCinG shOx
6. DrOpOUts 12mm x 142 thrU axle Or 135mm Qr
7. CaBle stOps FOr heiGht aDjUstaBle seatpOst
8.
1. The rear triangle is constructed entirely of high modulus, hand
laid-up carbon with co-molded aluminum lugs at the bearing and
pivot connections.
2. Depending on your riding style and geometry preference the
AS-R 5 is compatible with 120mm or 140mm forks.
3. Here at Yeti the Dogbone is an integral part of our suspension
design. Structurally, the Dogbone significantly reduces side to
side flex of the frames swingarm. Additionally, it prevents any side
loading on the rear shock, helping to increase its performance and
life.
4. The AS-R 5 has a tapered head tube. The bottom cup is 1.5"
and the top cup is 1.125". This creates a very stiff front end in
combination with a tapered fork without adding additional weight.
5. The ASR5 uses a 2.0 inch stroke, 7.875 inch eye to eye shock, by
Fox Racing Shox.
6. The Yeti chip system allows for an easy switch between a standard
135mm QR or the142mm x 12mm Shimano thru-axle system.
7. Dedicated cable stops for a height adjustable seat post make
routing the line clean and easy. Enhance your trail riding experience
on the ASR5 with a dropper post.
9.