Printer Connecting (Power & Usb); Power; Usb - HiTi Digital CS-200e User Manual

1.3.2 Printer Connecting (Power & USB)

Power

a. Connect power cable to power adaptor, then plug the power connector to printer's power socket
b. Plug the power plug to an earthed power socket
Please make sure the power plug is connected into a properly protected and earthed electrical source.
c. Switch ON from the ON/OFF button to power up the printer, then the LCM control panel should light up and display
"ready" message which indicates the printer is under working condition.
For your own safety, please make sure the power cable is always unplugged before attempting any
service maintenance work.
a

USB

Please make sure the print driver software is fully installed before
connecting the USB cable to your printer device.
Refer to the print driver installation section of this user guide for more details,
and follow the instruction carefully.
b c
07
HiTi CS-200e user manual
d
Ready